300kN500kN1000kN钢绞线轴向力疲劳试验机Steel Strand Axial Force Fatigue Tester
作者 Ming
浏览
发布时间 20/05/11
300kN/500kN/1000kN钢绞线轴向力疲劳试验机，测定9.53mm～28.6mm钢绞线轴向力疲劳性能。钢绞线疲劳试验频率0.1～20Hz，轴向力循环次数≥2x106。钢绞线疲劳试验过程中循环力不应出现停顿，当试验出现意外中断时可允许继续试验，疲劳试验力循环频率保持稳定。
 300kN～1000kN钢绞线轴向力疲劳试验机；9.53～17.8钢绞线轴向力疲劳试验机；17.8～21.8钢绞线轴向力疲劳试验机；Material 28.6钢绞线轴向力疲劳试验机；100kN钢丝拉伸疲劳试验机；300kN钢筋轴向力疲劳试验机；预应力钢绞线疲劳试验机；钢棒钢筋疲劳试验循环频率120Hz；1000kN钢棒疲劳试验机；1000kN钢绞线偏斜拉伸试验机；jnshiyanji.cn；PC钢棒疲劳试验机；1000kN大行程钢绞线万能试验机；500kN钢绞线应力腐蚀试验机；50kN钢丝高温腐蚀松弛试验机；1000h钢绞线拉伸应力松弛试验机；300kN钢材等温松弛试验机；6mm/10mm钢丝反复弯曲试验机；4～14mm金属线材扭转试验机；6mm/10mm钢丝缠绕试验机；13mm钢材镀层附着力试验机；50mm全自动钢筋称重测长仪；40mm全自动钢筋弯曲试验机；GB/T 21839-2019预应力混凝土用钢材轴向力疲劳试验；
GB/T36915-2019；GB/T5224-2014；GB/T5223.3-2017；GB/T5223-2014；GB/T28900-2012；GB/T20065-2016；
ISO 15630-3；ISO 14655；ISO 6892-1；HRJ Material Tester；ISO 7348；ISO 23718；ISO 6934-2；ISO 6934-3；ISO 6934-4；ISO 6935-1；ISO 6935-2；ASTM E8M；ASTM E9；ASTM A 368；ASTM E328-2013；ASTM A416M-2012a；ASTM A882；BS EN 10002-1；HRJ Material Tester；EN 10391；BS 5896-2012；JIS G3536；JIS G3137；JIS Z2276-2012；AS NZS 4672.2；GB/T10120-2013；GB/T13788-2017；GB/T1499.1-2017；GB/T1499.2-2018；GB/T30828-2014；GB/T3428-2012；GB/T31314-2014；GB/T31304-2014；GB/T30826-2014；GB/T33026-2017；GB/T25823-2010；GB/T33363-2016；GB/T7314-2017E；GB/T20492-2019；GB/T16825.1；GB/T25821-2010；JT/T1268-2019；JT/T876-2019；HRJ Material Tester；JT/T1063-2016；JT/T1090-2016；JT/T1105-2016；YB/T124-2017；YB/T183-2017；HRJ Material Tester；YB/T4165-2018；YB/T4574-2016；YB/T4581-2017；YB/T4428-2014；YB/T4451-2015；YB/T4542-2016；YD/T3322-2018；YB/T098-2012；YB/T5004-2012；
Steel Strand Axial Force Fatigue Tester；Test methods of steel for prestressing concrete；Steel Bars Tensile Tester；Steel Strand Tensile Tester；Steel Strand Skew Tensile Tester；Steel Wires Stress Relaxation Tester；Steel Bars Stress Relaxation Tester；Steel Strand Stress Relaxation Tester；HRJ Material Tester；High Temperature Stress Relaxation Tester；Metallic Materials Wire Reverse Bend Tester；Metal Wire Repeated Bending Tester；Metal Wire Torsion Tester；Wire High Speed Torsion Tester；Metallic Materials Wire Wrapping Tester；Bare Wires Mandrel Winding Tester；Steel bars Weight Length Tester；Three-Position Steel Bar Bend Tester；Metal Materials Bending Tester；Fully Automatic Steel Bar Repeated Bending Tester；Steel bars for the prestressing of concrete；Steel wire for prestressing of concrete；Steel wire and wire products-General test methods；Testing Machines Manufacturer；Mechanics Tester Manufacturer；Tester Service Center；Tester Fittings Supply Center；Material Mechanical Tester；Various Material Testing Machines；Laboratory Equipment；
Test Accessories Design Manufacture Center；Special Test Accessories Center；
济南恒瑞金试验机有限公司；钢绞线力学性能试验机；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心） |