2000N.m500kN高强螺栓自动测试仪High Strength Bolt Automatic Testing System
作者 Ming
浏览
发布时间 19/11/11
2000N.m500kN高强螺栓自动测试仪用于大六角头高强螺栓连接副轴向力试验、扭矩试验、扭矩系数复验；扭剪型高强度螺栓预拉力复验、副施工扭矩检验。自动计算平均轴力、平均扭矩、平均扭矩系数、标准偏差和变异系数。具备螺栓连接副抗滑移初拧和终拧辅助装置，无需购买抗滑移系数传感器。
螺栓扭矩2000N.m/0.1N.m；螺栓轴力500kN/0.1kN；大六角头螺栓M12/M16/M20/M22/M24/M27/M30；扭剪型高强螺栓M16/M20/M22/M24/M27/M30；测试螺栓长度40mm～280mm；HRJ-Test移动式高强螺栓检测仪。
 GB 50205-2017钢结构工程施工质量验收规范；GB/T32076.2-2015预载荷高强度栓接结构连接副；NB/T31082-2016风电机组塔架用高强度螺栓连接副；GB/T3632钢结构用扭剪型高强度螺栓连接副；GB/T16823.3紧固件扭矩-夹紧力试验；HRJ Tester；GB/T3098.1-2010紧固件机械性能；3kN.m～50kN.m高强螺栓扭矩试验机；
ASTM F3125−2015；ASTM A307-2017；ASTM A183；ASTM A563-2015；ASTM.A320M-2015；ASTM A354-2011；ASTM A325-2014；ASTM F959；ASTM F2437；CNS 12209；JIS B1009-2014；JIS B1166；EN 14399；EN 16047；DIN 103；DIN 2510-5；DIN 558；DIN 601；DIN 931；DIN 933；DIN 960；DIN 961；ISO 898-1；NF E25-036；ISO/TR 16224；GB/T32076.1-2015；HRJ Tester；GB/T32076.3-2015；GB/T32076.4-2015；GB/T32076.5-2015；GB/T32076.6-2015；GB/T32076.7-2015；GB/T32076.8-2017；GB/T32076.9-2017；GB/T32076.10-2018；GB/T6170-2015；GB/T3106-2016；GB/Z32564-2016；GB/T192；GB/T1228；GB/T1229；GB/T1230；GB/T1231；GB/T5782-2016；
High Strength Bolt Automatic Testing System；HRJ Tester；Preloading High-Strength Structural Bolting Assemblies Test；Bolting Assemblies Torque Coefficient Test；Torque Clamp Force Testing；Wind Turbine Bolting Assemblies Test；Bolting Axial Force Test；Bolting Torque Test；Bolting Torque Coefficient Test；Coefficient of friction between bearing surfaces under nut or bolt head；Coefficient of friction between threads；Coefficient of total friction；High-strength structural bolting assemblies for preloading；Suitability for preloading；System HR-Hexagon bolt with large width across flatsand nut assemblies；HRJ Tester；System HV-Hexagon bolt with large width across flats and nut assemblies；Torshear type bolt with cup head，and nut assemblies；Torshear type bolt with hexagon head with large width across flats,and nut assemblies；High strength bolts with large hexagon head for steel structures；High strength plain washers for steel structures；Width Across Flats For Hexagon Products；High-Strength Bolting Assemblies For Tower on Wind Turbine；HRJ Tester；Specifications of high strength bolts with large hexagon head,large hexagon nuts；Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures；Code for acceptance of construction quality of steel structures；Fasteners-Torque clamp force testing；Mechanical properties of fasteners-Bolts；Measuring method for friction coefficient of screw thread pair of automobiles；Sets of high strength torque control bolt；Fasteners Bolts screws and studs Nominal lengths and thread lengths；HRJ Tester；High-Strength Structural Bolting Assemblies For Preloading；Bolted Connections with Reduced Shank；standard specification for carbon steel track bolts and nuts；Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service；Standard Specification for High Strength Structural Bolts；120ksi(830MPa) and 150ksi(1040MPa) Minimum Tensile Strength；HRJ Testing Machine； |