300kN结构木材四点弯曲试验Structural Timber Characterization Bending Strength Test
作者 Ming
浏览
发布时间 19/06/03
300kN结构木材四点弯曲试验用于测试木材抗弯曲力、抗弯曲强度和弹性模量。采用四点加载，依据AS/NZS4063.1-2010，完成木结构部件、框架部件、LVL层积木、PSL平行积成木、胶合层积木、规格材、原木材等抗弯曲能力测试。
 300kN结构木材四点弯曲试验机；300kN结构木材弹性模量试验机；300kN结构木材弯曲强度试验机；300kN结构木材试验机；HRJ Tester；300kN木结构部件试验机；300kN层积木强度试验机；300kN规格材强度试验机；300kN原木材强度试验机；300kN结构木材接缝抗剪强度试验机；300kN木材弯曲力试验机；300kN结构木材拉伸试验机；300kN结构木材抗压力试验机；300kN木材承载力试验机；45*95mm规格材拉伸试验机；2"x4"规格材试验机；AS/NZS木材特性测试控软件；规格材材质等级检验方法；木结构试验方法；木材强度等级检验方法；建筑结构荷载规范；HRJ Tester；受弯木结构力学性能检验方法；木基结构板材力学性能指标；集成材理化性能试验方法；木结构工程施工质量验收规范；胶合木结构技术规范；建筑工程方木原木结构设计；建筑工程轻型木结构设计；原木及板材材质标准；建筑工程承重胶合木结构设计；原木锯材批量检查抽样判定方法；多高层木结构建筑技术标准；装配式木结构建筑技术标准；轻型木结构用指接规格材；轻型木结构连接件通用技术条件；轻型木结构锯材用原木检验；HRJ Tester；轻型木桁架技术规范；1000kN木结构力学试验机；120kN长木材强度试验机；200kN集成材力学试验机；500kN木板材力学试验机；
AS/NZS 4063.1:2010；AS/NZS 4357.2；ISO 1033-1；HRJ Tester；ISO/DIS 12578；ISO/CD 12579；ISO/CD 12580；ISO/CD 18375；ANSI/AITC A 190.1；ASTM D 3737；DIN 1052；EN 386；EN 390；EN 408；BS EN 789；BS EN 326-1；GOST 9624；CNS 11671:2014；CNS 444:2012；HRJ Tester；ANSI/APA PRG320-2012；EWS S475；APA PS 1-09；APA L294：2011；ASTM D5055-2013；ASTM D3528；NF B51-127-19；ASTM D5456-2010a；APA EWS S550-2005；HRJ Tester；BS EN 1912：2012；
Structural Timber Characterization Bending Strength Tester；Test Set-up Measuring Bending Strength and Apparent Modulus of Elasticity；Structural Timber Characterization Loading Tester；Dimension Lumber Characterization Tester；Characterization of structural timber-Test methods；Stress-graded Timber；Tension Strength Parallel to Grain；Compression Strength Parallel to Grain；Beam Shear Strength；HRJ Tester；Bearing Strength Perpendicular to Grain；Bearing Strength Parallel to Grain；Modulus of Rigidity in Torsion；Tension Strength Perpendicular to Grain；Compression Strength and Modulus of Elasticity Perpendicular to Grain；Shear Strength at Joint Details；Testing Rectangular Sections of Sawn Solid Timber；Structural laminated veneer lumber (LVL) Test methods；Determination of modulus of elasticity in bending and of bending strength；Determination of structural properties-Test methods；Determination of mechanical properties of wood based panels；Plywood Bonding quality Test methods；HRJ Tester；Determination of tensile strength perpendicular to the plane of the board；Sampling and cutting of test pieces and expression of test results；Test method of evaluating the properties of glued-laminated timber；Visual grading rules for dimension lumber in light wood frame construction；Code for design of timber structures；Load code for the design of building structures；Code for acceptance of construction quality of timber structures；Technical code of glude laminated timber structures；Log for lumber in light wood frame construction；Finger jointed structural dimension lumber in light wood frame construction；General specification for connector of light wood-frame construction；Code for construction of timber structures；Technical code for light wood trusses；Sampling and judging methods for lot inspection of logs；Sampling and judging methods for lot inspection of sawn timbers；Standard for methods testing of timber structures；Tension Strength Hydraulically Operated Fixture；Testing Machines Manufacturer；Tester Fittings Supply Center；HengRuiJin Testing Machine Co.,Ltd.
济南恒瑞金试验机有限公司；力学性能试验机制造商；山东省力值硬度计量委员
（试验机服务中心）（试验机配件供应中心）（特殊夹具定制中心） |